Preparing for a Shortcut Key to Store Scanned Data to a
Computer
This section describes how to register the information, such as the computer for storing the scanned data or the scan
settings, to the button on the [Home] screen or
Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.
Touch Panel Model(P. 231)
5 Lines LCD Model(P. 232)
Touch Panel Model
Required Preparations
●
Make preparations such as installing the scanner driver (ScanGear MF) and application (ScanGear MF) to the
computer used as the save location.
1
On the control panel, press [Menu] in the [Home] screen.
2
Press [Function Settings]
Settings].
➠
The [Shortcut Key Settings] screen is displayed.
3
Press [Register].
➠
The [Select Shortcut Key] screen is displayed.
4
Select the shortcut key to which you want to register settings.
Select [Scan -> PC1] or [Scan -> PC2].
5
Select the connection method to a computer.
Scanning
on the control panel.
Preparing to Save Scanned Data to a Computer(P. 229)
[Send]
[Scan and Send Settings]
231
8W0J-04W
[Home] Screen(P. 120)
[Shortcut Key