Scanning From A Computer (Saving To A Computer) - Canon imageCLASS MF269dw II User Manual

Scanning from a Computer (Saving to a Computer)

Use either of the following applications to perform scanning.
Dedicated application (MF Scan Utility)
Scan easily using the setting to suit your purpose. Send scanned data to a specified application to display it
and send it by e-mail. You can also use the ScanGear MF screen to configure advanced settings.
Using a Dedicated Application to Perform Scanning - MF Scan Utility(P. 254)
Other TWAIN- and WIA-supported Applications
You can also use image processing software, document software, and other applications that support
*1
TWAIN or WIA
Check the manual of the application you are using to see if it supports TWAIN or WIA.
Scanning Using Other TWAIN- and WIA-supported Applications(P. 255)
*1
TWAIN is a standard for connecting a scanner or other image input device to a computer.
*2
WIA is a function that comes standard in Windows.
Using a Dedicated Application to Perform Scanning - MF Scan Utility
After placing an original on the machine, scan using MF Scan Utility on a computer.
Required Preparations
● Install the scanner driver (ScanGear MF) and application (MF Scan Utility) on the computer.
Software and Drivers to the Computer(P. 106)
1
Place the original on the machine.
2
Start MF Scan Utility on a computer.
3
For [Product Name], select the machine.
4
Click the button corresponding to the original type and purpose to start scanning.
You can scan an original and save the scanned data to a computer connected to the
machine. You can set the format and save location when scanning from a computer.
This method lets you see the scanned data immediately on the computer screen so
you can check the image quality and make adjustments.
*2
. Scanned data is imported directly to the application for immediate editing and processing.
Scanning
Placing Originals(P. 139)
Starting MF Scan Utility(P. 257)
254
8W0J-057
Installing