Ssh Login; Configuring Ip Address - Planet WGS-804HPT Quick Installation Manual

6. SSH Login

The Wall-mount
management. The switch asks for user name and password for remote login
when using Telnet; please use "admin" for both username and password.
Default IP address: 192.168.0.100
Username: admin
Password: admin
Figure 6-1: Wall-mount Managed Switch SSH Login Screen
The user can now enter commands to manage the Wall-mount Managed
Switch. For a detailed description of the commands, please refer to the
following chapters.
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
6.1 Configuring IP Address
The Wall-mount Managed Switch is shipped with default IP address shown
below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch,
please use the procedure as follows:
18
Managed Switch also supports SSHv2 for remote