About This Guide - Emerson Rosemount 8800D Series Quick Start Manual

August 2020
1

About this guide

This guide provides basic installation and configuration instructions for the
Rosemount
transmitters.
For more information on installation and configuration instructions,
diagnostics, maintenance, service, and troubleshooting for:
• Foundation Fieldbus devices consult 00809-0100-4772 Manual
• Non-MultiVariable meters and meters with the MTA option code for
HART and all Foundation Fieldbus devices, please consult
00809-0100-4004 Manual
For more information on installation and configuration instructions,
diagnostics, maintenance, service, and troubleshooting, for meters with the
MPA or MCA option code, please consult 00809-1100-4004 Manual.
For hazardous location installation, including Explosion-proof, Flameproof,
or Intrinsic Safety (I.S.), please consult 00825-VA00-0001 Approval
Document.
1.1 Hazard messages
This document uses the following criteria for hazard messages based on
ANSI standards Z535.6-2011 (R2017).
DANGER
Serious injury or death will occur if a hazardous situation is not avoided.
WARNING
Serious injury or death could occur if a hazardous situation is not avoided.
CAUTION
Minor or moderate injury will or could occur if a hazardous situation is not
avoided.
NOTICE
Data loss, property damage, hardware damage, or software damage can
occur if a situation is not avoided. There is no credible risk of physical injury.
Quick Start Guide
™
8800D Series Vortex Flow meters with single, dual, or quad
Quick Start Guide
3