M+Fx5-4Da_Waveoutputreqsetting (Waveform Output Operation); Overview; Labels - Mitsubishi Electric MELSEC iQ-F Series Manual

3.4
M+FX5-4DA_WaveOutputReqSetting (Waveform
output operation)

Overview

As i_bEN (execution command) turns on, a start or stop request for the wave output of a specified channel or all channels is
written to the buffer memory.
M+FX5-4DA_WaveOutputReqSetting
(1) B
: i_bEN
(2) DUT : i_stModule
(3) UW : i_uCH
(4) UW : i_uStartStopReq
(5) UW : i_uUnitType

Labels

Input label
No. Variable name
(1) i_bEN
(2) i_stModule
(3) i_uCH
(4) i_uStartStopReq
(5) i_uUnitType
Output label
No. Variable name
(6) o_bENO
(7) o_bOK
(8) o_uWaveStatusCH1
(9) o_uWaveStatusCH2
(10) o_uWaveStatusCH3
(11) o_uWaveStatusCH4
3 ANALOG OUTPUT MODULE FB
34

3.4 M+FX5-4DA_WaveOutputReqSetting (Waveform output operation)

o_bENO : B
o_bOK : B
o_uWaveStatusCH1 : UW
o_uWaveStatusCH2 : UW
o_uWaveStatusCH3 : UW
o_uWaveStatusCH4 : UW
o_bErr : B
o_uErrId : UW
Name Data type
Execution command Bit
Module label Structure
Target channel Word [Unsigned]/Bit
String [16-bit]
Waveform output Word [Unsigned]/Bit
start/stop request String [16-bit]
Module type Word [Unsigned]/Bit
String [16-bit]
Name Data type
Execution status Bit
Normal completion Bit
CH1 Wave pattern Word [Unsigned]/Bit
output state monitor String [16-bit]
CH2 Wave pattern Word [Unsigned]/Bit
output state monitor String [16-bit]
CH3 Wave pattern Word [Unsigned]/Bit
output state monitor String [16-bit]
CH4 Wave pattern Word [Unsigned]/Bit
output state monitor String [16-bit]
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Range
ON, OFF
The setting range
differs depending on
the module label.
1 to 4, 15
0: Waveform output
stop request
1: Waveform output
start request
2: Waveform output
pause request
0: FX5-4DA
Default value
OFF
OFF
0
0
0
0
Description
ON: The FB is activated.
OFF: The FB is not activated.
Specifies the module label for the analog output
module.
• 1 to 4: The corresponding channel number is
specified.
• 15: All channels are specified.
Specifies a start or stop request for the wave output.
Specifies a module type.
Description
ON: The execution command is ON.
OFF: The execution command is OFF.
The on state indicates that the execution of the FB is
normal.
Outputs the value of the wave output status (stopped,
output, or paused).
0: Waveform output stopped
1: Waveform output
2: Waveform output paused
3: Waveform output step execution
The FB is not capable of executing the wave output
step action function.
To execute the function, use the device/buffer memory
batch monitor of GX Works3.
For details, refer to MELSEC iQ-F FX5 User's
Manual (Analog Control - Intelligent function module).