Table of Contents
Advertisement
Safety and responsibility
18
WARNING!
Correct and proper use
Possible consequence: Fatal or very serious injuries
–
The unit is not intended to convey or regulate gas‐
eous or solid media
–
Do not exceed the rated pressure, speed or tem‐
perature for the pump
–
The unit may only be used in accordance with the
technical data and specifications provided in these
operating instructions and in the operating instruc‐
tions for the individual components
–
The system is not designed for use in areas at risk
from explosion
–
Only switch the pump on if it has been properly
fastened to the floor
–
Only switch the pump on if it the front cover has
been attached.
WARNING!
Operational lifetime of the pump hoses
Possible consequence: Fatal or very serious injuries
The operational lifetime of the pump hoses cannot be
precisely specified. For this reason, the possibility of
fracture and consequential leakage of liquids must be
accounted for. If the hose rupture alarm (optional) is
fitted, then the pump can be stopped and / or an elec‐
trical valve can be actuated.
In addition, you must avoid particles from untight
hoses being introduced into the media being con‐
veyeed. This can be achieved e.g. by means of filtra‐
tion, a hose rupture alarm or other means suitable for
the respective process.
CAUTION!
CIP cleaning
In the event of CIP cleaning, it is necessary to obtain
information from the manufacturer about correct instal‐
lation of the pump (a special installation is required),
as well as regarding the compatibility of the cleaning
agents with the pump hoses of the pump and the other
hydraulic connections.
Cleaning should be undertaken at the recommended
maximum temperature.
CAUTION!
Direction of rotation / flow direction
Possible consequence: Material damage right through
to destruction of the unit
–
The pump's direction of rotation in relation to the
desired flow direction must be checked prior to
every start.
Advertisement
Table of Contents
