Network Driver Install For Win Nt4.0 - Boser HS-2601 Manual

5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0

1. Click the Start button, then go to Settings and click on Control Panel.
2. Click on the Network icon to start the Network window.
3. Click on the Adapters tab, and then click on Add.
4. In the Select Network Adapter window, click on Have Disk.
5. This will bring up the Insert Disk window.
6. Supply the directory where the Windows NT driver file are located.
(If in driver a:, type a:\)
7. The Select OEM Option window will show up.
Select Intel EtherExpress PRO Adapter
8. Click OK to finish the install.
9. Once the installation is complete, the system must be shut down and restarted for
the new driver to take effect.
10. After restart, checking on the Network driver, the Properties of the driver should
look similar figure.
47