Table of Contents
Advertisement
4. Inserting the new lamp Unit
4.3 Reinstalling the Side Panel
What has to be done
After the new lamp unit has been installed, the side panel has to be remounted.
Necessary tools
A flatblade screwdriver of 5 mm
Reinstalling the side panel
1. Move the cover guides under the back cover and push the front of the cover against the projector frame lining up the cover lock
screw with the speed nut (A) on the frame.
Image 4-6
Mounting the side cover
2. Turn with a screwdriver the side panel lock screw (B) a quarter turn clockwise to lock.
Image 4-8
Locking side panel
10
Image 4-7
Closing the side cover
B
R5976544 UNIVERSAL LAMP REPLACEMENT KIT 04/01/2005
Advertisement
Table of Contents
