Addressing Of Each Output When Using Art-Net - Blizzard Lighting PixlStik Manual

NOTE - When hanging multiple end-to-end connected fixtures verti-
cally, be sure to secure each fixture together with safety cables. First,
attach a safety cable from one fixture's hanging bracket to a secure
rigging point. Then, secure each fixture together by attaching a safety
cable from each fixture's mounting bracket to its neighboring fixture's
safety cable loop.

Addressing Of Each Output When Using Art-Net™

The PixlKontrol™ uses an RJ45 data connection to link all data ports. You can
connect up to 4 daisy chained PixlStik™ fixtures per output on the PixlKontrol™.
The following diagram illustrates how to assemble the data connections, and
each fixtures starting DMX address per universe using Art-Net:
Fixture 1: 001 <--> 120
Fixture 2: 121 <--> 240
Fixture 3: 241 <--> 360
Fixture 4: 361 <--> 480
Make sure each total length of the connecting network cables (RJ45) does not
exceed 10-meters (32.8 feet).
Page 9
PixlStik™ User Manual Rev. A © 2015 Blizzard Lighting, LLC