Table of Contents
Advertisement
2. MEET THE PIXLSTIK™ LED STRIP
PixlStik™ is a pixel mapping, one-meter strip that sets up in minutes with
minimal technical knowledge. Each unit houses 40 tri-colored RGB SMD
5050 LEDs, has a pixel pitch of 25 millimeters and 120-degree viewing
angle, plus each unit comes with a changeable clear and frosted lens filter.
The mechanics of the PixlStik™ have been well thought out and designed
to allow tons of mounting flexibility through its sliding hardware on the
back for truss applications, as well as on the side for multiple vertical
linking.
The external control unit of the PixlStik™ is called PixlKontrol™, and is
compatible with Art-Net, Kling-Net, DMX protocol, and it runs both the
signal and power over a RJ45 In/Out connections that provide great
stability and connection while daisy chaining up to 4 PixlStik™ fixtures per
each of the PixlKontrol's 4 power + data outputs for a total of up to 16
fixtures per unit.
MAIN FEATURES
• 40* SMD5050 RGB/FC high-efficiency LEDs
• Luminous flux: frosted lens = 828 NIT, transparent lens = 1174 NIT
• Individual pixel control
• Viewing angle: 120°
• Pixel pitch: 25 mm
• Color synthesis: RGB/Full Color mixing (>16 million colors)
• Flicker-free constant-current 600hz LED driver
• LEDs average life span: >50,000 hours
ADDITIONAL FEATURES
• Control protocols: Art-Net, Kling-Net, DMX
• Channels Art-Net: 120 per fixture
• Channels DMX:8
• Sturdy aluminum profile
• Internal Protection: IP20
• Sliding bracket for vertical hardware for connection of more units
• Frosted and transparent filter are included
• Power unit: DC24V
• IN/OUT power and signal through connections RJ45 (Max 16 units per
PixlKontrol™ driver)
Page 5
PixlStik™ User Manual Rev. A
© 2015 Blizzard Lighting, LLC
Advertisement
Table of Contents
