Reenable The Dhcp Client Of The Ap - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220

Reenable the DHCP client of the AP

If you disabled the DHCP client of the AP by assigning a static IP address, you can
reenable it.
To reenable the DHCP client of the AP:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Management > Network > Basic.
The IPv4 Settings page displays.
5. Select the DHCP radio button.
The IPv4 address fields no longer display.
6. Click the Apply button.
A pop-up window displays.
7. Click the OK button.
Your settings are saved.
Manage the Wired Network
Settings
30 User Manual