Set Up Email Alerts - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
5. To manage the remote log server capability, select one of the following Remote Log
radio buttons:
• Enable: The AP sends log messages to a remote log server.
You must specify the IP address of the remote log server (see Step 7).
• Disable: The AP does not send log messages to a remote log server.
This is the default settings.
6. If the remote log server capability is enabled, to manage whether the traffic log is
sent to the remote log server, select one of the following Traffic Log radio buttons:
• Enable: The AP sends its traffic log to the remote log server.
• Disable: The AP does not send its traffic log to the remote log server.
This is the default settings.
7. In the Log Server IP Address field, enter the IP address of the remote log server.
8. In the Log Server Port field, enter the port number that the AP uses to contact the
remote log server.
By default, the port number is 514.
9. Click the Apply button.
Your settings are saved.

Set up email alerts

You can specify an email address to which the AP automatically can send an alert when
the configuration of the AP is changed.
To set up email alerts:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
Monitor the AP and its Network
Connections
106 User Manual