Change The Language; Join A User Wifi Network On The Ap - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220

Change the language

By default, the language of the device UI is automatically detected. You can change the
language.
To change the language:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. In the upper right corner, select a language from the menu.
The page refreshes with the language that you selected.

Join a user WiFi network on the AP

You can manually add a WiFi device such as a WiFi-enabled computer, tablet, or
smartphone to a user WiFi network on the AP.
On the WiFi device that you want to connect to the AP, use the software application
that manages your WiFi connections.
Note: By default, the AP's first user WiFi network is enabled but the second, third, and
fourth user WiFi networks are disabled. These user WiFi networks differ from the
management WiFi network, which you can use only to log in over a WiFi connection to
the AP's device UI.
Installation and Initial Login 26 User Manual