Manually Block A Wifi Client From A User Wifi Network - NETGEAR WAX220 User Manual

Essentials WiFi 6 AX4200 Dual Band Multi-Gig Access Point Model WAX220
10. Click the Apply button.
A pop-up window displays.
11. Click the OK button.
Your settings are saved. The page closes. (The original page with the Wireless Settings
section and other sections remains open.)
Manually block a WiFi client from a user WiFi
network
You can manually block a WiFi client or connection from a user WiFi network.
If you do so, an ACL that denies the MAC address of the client is automatically added
to the user WiFi network from which you blocked the client. That ACL denies access to
the client but allows access to all other clients. You can manually delete the client from
the ACL, after which the client is no longer denied access to the user WiFi network. For
more information, see Manage access to a user WiFi network based on a client's MAC
address on page 56.
To manually block a WiFi client or connection from a user WiFi network:
1. Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Connections.
Manage Advanced WiFi Settings 58 User Manual