universalblue UBCA2001-20 Instruction Manual page 21

 Using (2)ST3*6 fix the discharge collar into the air outlet
adapter.
 Attach an adequate length of 150mm round duct to the air
outlet adapter.
 Carefully place the decorative chimney bottom into the
recessed area of the hood body top and using (2) ST2.9X14
screws and (2) ∅7×27mm dry wall anchors to fix it.
 Carefully slide the decorative chimney top down inside the
decorative chimney bottom. Use (2) M4X6 screws on both
side of chimney top to fix it on the chimney holder.
 To avoid hood body move, using (2) ST4.2x3 screws and (2)
dry wall anchors ∅10×45mm to fix hood inside.
21