universalblue UBCA2001-20 Instruction Manual page 20

Electrical installation
Electrical wiring must be made by a person or people qualified in
accordance with all applicable codes and standards. This hood
must be properly grounded. Disconnect electrical power at the
service entrance before wiring.
If the power cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified people to avoid
a hazard.
Installation
When installing the hood, the minimum safety distances mentioned
above must be kept in mind.
To install the hood, please read the following installation notes
carefully:
 Secure the hood mounting bracket to the wall using (2) ST 5
x 45mm mounting screws and dry wall anchors ∅10×45mm.
Align the hood body with the hood mounting bracket. Gently
lower the hood until it securely engages the bracket.
20