Emerson Rosemount 700XA Reference Manual page 7

July 2020
MON2020
MON2020 provides operator control of the Rosemount 700XA, monitors analysis results, and inspects and edits various parameters
that affect the analyzer operation. It also controls display and printout of the chromatograms and reports, and it stops and starts
automatic analysis cycling or calibration runs.
After the equipment/software has been installed and the operation stabilized, automatic operation takes place over an Ethernet
network.
™
MON2020 is a Windows -based program that allows you to maintain, operate, and troubleshoot a gas chromatograph (GC).
Individual GC functions that can be initiated or controlled by MON2020 include, but are not limited to, the following:
■ Valve activations
■ Timing adjustments
■ Stream sequences
■ Calibrations
■ Baseline runs
■ Analyses
■ Halt operation
■ Stream/detector/heater assignments
■ Stream/component table assignments
■ Stream/calculation assignments
■ Diagnostics
■ Alarm and event processing
■ Event sequence changes
■ Component table adjustments
■ Calculation adjustments
■ Alarm parameters adjustments
■ Analog scale adjustments
■ Local operator interface (LOI) variable assignments (optional)
Reports and logs that can be produced, depending upon the GC application in use, include, but are not limited to, the following:
■ Configuration report
■ Parameter list
■ Analysis chromatogram
■ Chromatogram comparison
■ Alarm log (unacknowledged and active alarms)
■ Event log
■ Various analysis reports
For a complete list of the GC functions, reports, and logs available through MON2020, consult the MON2020 for Gas
Chromatographs Reference Manual (P/N 2-3-9000-745).
Theory of operation
The following sections discuss the theory of operation for the gas chromatograph, including the engineering principles and
concepts used.
Rosemount 700XA 7