Emerson Rosemount 700XA Reference Manual page 61

July 2020
CAUTION
ELECTRICAL HAZARD
Failure to follow this precaution may cause a short circuit and damage equipment.
Allow only a minimum exposure of bare wires to prevent short circuits.
2. Insert the exposed end into the clamp beneath the termination screw.
3. Tighten the screw.
Wiring the analog inputs
All Rosemount 700XA gas chromatographs (GCs) have at least two analog inputs. An additional four analog inputs are available
with a ROC800 AI-16 card (see
card cage.
Analog inputs on the backplane
There are two analog input connections on the backplane at terminal block 10 (TB10).
Table 6: Analog Inputs TB10
TB10 Function
Pin 1 +AI_1
Pin 2 -AI_1
Pin 3 +AI_2
Pin 4 -AI_2
Rosemount 700XA
Wire a ROC800 digital output (DO) module) that can be installed into one of the optional slots in the
61