Set Object Removal Detection - HIKVISION DS-2XS6A87G1-LS/4G User Manual

6. Optional: You can set the parameters of multiple areas by repeating the above steps.
7. For the arming schedule settings, refer to Set Arming Schedule . For the linkage method settings,
refer to Linkage Method Settings .
8. Click Save.

6.2.8 Set Object Removal Detection

It detects whether the objects are removed from the predefined detection region, such as the
exhibits on display. If it occurs, the device can take linkage actions and the staff can take measures
to reduce property loss.
Before You Start
For certain device models, you need to enable the smart event function on VCA Resource page
first.
Steps
1. Go to VCA → Smart Event → Object Removal Detection . For certain device models, you should
go to Configuration → Event → Smart Event → Object Removal Detection .
2. Check Enable.
3. Select a region. For the detection region settings, refer to Draw Area .
4. Set the minimum size and the maximum size for the target to improve detection accuracy. Only
targets whose size are between the maximum size and the minimum size trigger the detection.
For the detail settings, refer to Set Size Filter .
5. Set the rule.
Network Camera User Manual
Figure 6-7 Set Rule
47