Magnetek Enrange Flex EX Instruction Manual page 25

b. Non-Interlocked Functions
Contrary to interlocked settings, non-interlocked settings allow the two adjacent push
buttons be used simultaneously. Non-interlocked settings are usually applied to a
crane's auxiliary functions such as lights, horns, 3
Catch. Each dip-switch on the decoder module corresponds to one (1) motion or two
(2) adjacent push buttons (left & right push buttons).
Dip
Function Position
Code Setting
#1
A 1
B 1
C 1
D 1
E 1
F 1
Example #1: Left button (set to function code A) / right button (set to function code A)
Example #2: Left button (set to function code B) / right button (set to function code B)
Example #3: Left button (set to function code A) / right button (set to function code C)
Example #4: Left button (set to function code F) / right button (set to function code A)
Note: When set to Pitch & Catch function, make sure the 2
example, if the system is preset at Ch.01, then the 2
you must also set the dip-switch on the receiving module (position #7 & #8) to "10" position (2-channel
scanning), please refer to page 21.
Note: When set to "Auxiliary Stop" do make sure that JP3 is inserted (refer to jumper settings next page).
Dip Position Setting
#2 - #4 (left button)
&
#5 - #7 (right button)
000
001
010
100
110
111
rd
speed, auxiliary stops and Pitch &
Function Description
Normal (momentary) contact.
Toggled (latching) contact.
Acceleration (3
Normal + Start function. For added safety,
you must first rotate and hold the power key
switch at "START" position and then press
the intended push button at the same
time to activate the output relay.
Pitch & Catch
Auxiliary Stop.
nd
transmitter is set to the next upper channel. For
nd
transmitter should be set to Ch.02. Furthermore,
Flex 8EX EU System Instruction Manual
rd
speed).
→ 1 000 000
→ 1 001 001
→ 1 000 010
→ 1 110 000
March 2012
23 of 37