Magnetek Enrange Flex EX Instruction Manual page 21

2. 4-output relays configuration with Opened/Closed contact at 2
nd
At 2 speed, only the 2
on how to set to this function).
st
Forward 1 speed push button pressed
↓
F1 R1 F2
3. 4-output relays configuration with Closed/Closed contact at 2
nd
At 2 speed, both 1
closed (refer to page 22 on how to set to this function).
st
Forward 1 speed push button pressed
↓
F1 R1 F2
c. ON/OFF Push Button Function
The user can set any of the two adjacent push buttons on the transmitter to behave like a
mechanical ON & OFF rocker switch (refer to page 22 on how to set to this function).
When "On" output relay is closed ("On" push button pressed), the "Off" output relay will
open automatically, or vice versa.
d. START/AUX Function
After initiating the START function the Start position will become an auxiliary function with
momentary contact. For an auxiliary applications such as horns or buzzers, please
connect it to the FUNC output relay (wire #6) located inside the receiver unit.
nd
speed (F2 or R2) output relay is closed (refer to page 22
R2
st
speed (F1 or R1) and 2
R2
OFF ON
nd
speed
nd
Forward 2 speed push button pressed
↓
F1 R1 F2
nd
speed
nd
speed (F2 or R2) output relays are
nd
Forward 2 speed push button pressed
↓
F1 R1 F2
Flex 8EX EU System Instruction Manual
R2
R2
March 2012
19 of 37