Mitsubishi Heavy Industries SCM71ZM-S1 Technical Manual page 326

③
How to install the receiver
The receiver can be installed by replacing with a cover of the panel.
CAUTION: When installing the receiver after unit has been
due to falling may result because of working at high place.
① Remove the cover
Insert a flat-blade screw driver into the dented part (2 places),
and wrench slightly.
② Connect the wiring
Connect wiring of the receiver to the wiring
in the back.
ATTENTION: Do not remove the clamp fixed the wiring.
Connect
③ Installation of the receiver
Check direction of the receiver, and
CAUTION: Connect the connectors before installing the receiver.
In case of connecting after the receiver had been installed,
it will be necessary to remove the panel.
fixed, injury
fix to the panel.
325
- -
Place the connectors
under the panel
2
'17 • SCM-T-225
4
2016/11/14 15:53:47