Mitsubishi Heavy Industries SCM71ZM-S1 Technical Manual page 149

7.1.2 SRK-ZS series
(1) Operation control function by wireless remote control
Operation section
OPERATION MODE select button
Each time the button is pressed, the
mode changes.
TEMPERATURE button
This button sets the room temperature.
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/
right) direction.
SILENT button
This button sets the SILENT operation.
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.
ON TIMER button
This button selects ON TIMER operation.
OFF TIMER button
This button selects OFF TIMER
operation.
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
MENU switch
This switch selects the CLEAN
operation, display brightness adjustment
and PRESET operation.
SLEEP button
This button selects SLEEP operation.
Unit display section
RUN light (green)
• Illuminates during operation.
Blinks slowly when CLEAN operation
•
(3 seconds ON, 1 second OFF).
• Blinks when airflow is stopped to
prevent blowing out of cold air in
heating operation. (1.5 seconds ON,
0.5 seconds OFF)
[View with the cover opened]
The above illustration shows all controls, but in practice
only the relevant parts are shown.
• RUN and TIMER lights blink quickly during invalid operation mode.
148
- -
'17 • SCM-T-225
Transmission section
ON/OFF (luminous) button
Press to start operation, press again
to stop.
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/
down) direction.
3D AUTO button
This button sets 3D AUTO operation.
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
SET/Child lock button
Use this button to set the timer and
Child lock.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
This button is used for setting the current
time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
ACL switch
This switch resets the program to default
state.
TIME SET UP switch
This switch is used for setting the time.
Wireless remote control signal receiver
Unit ON/OFF button
This button can be used for turning on/off
the unit when a remote control is not available.
TIMER light (yellow)
Illuminates during TIMER operation.