Mitsubishi Heavy Industries SCM71ZM-S1 Technical Manual page 295

EEV coils
1. Remove the faulty EEV coil
and disconnect the connector.
Note:
1) When disconnecting the
connector, be sure to
check the color marked
on the top of coil and
the color of the connector.
2) When replace to a new
coil, be sure to insert the
socket attached to the coil
to the pipe correctly.
Socket
294
- -
'17 • SCM-T-225
GREEN BLUE WHITE
(EEVD) (EEVC) (EEVA)
Marking color
EEVD
GREEN
EEVC
BLUE
EEVB
RED
EEVA
WHITE
RED
(EEVB)