Mitsubishi Heavy Industries SCM71ZM-S1 Technical Manual page 286

Fan and fan motor (FMo)
7. Detach the clamps.
8. Pull out the cable.
9. Loose 4 nuts.
10. Remove the fan motor
(FMo).
Compressor (CM)
1. Loosen screws and remove
the service panel and top
panel.
2. Loosen screws and remove
the cover and the terminal
cover.
3. Loosen screws and
disconnect all power cables
locally installed
Caution
Be sure to do above work
after turning the power OFF
by breaker.
Clanps
Screws
Cover
285
- -
Terminal cover
ï ï A fter removed terminal coverï ï
Side panel
'17 • SCM-T-225
Nuts
TB1 (for power)