Mitsubishi Heavy Industries SCM71ZM-S1 Technical Manual page 284

NO. Functions
Preparation of display of heating
33
opration
34 Display of defrost operation
Display of compressor protection
35
operation
36 Missmatch operation mode
37 Periodic check
38 Display of check
39 Display of auto cleaning operation
40 Display of room temperature
41
Display of demand control operation
Display of operation on auto
42
adjusting static pressure
43
External static pressure setting
SRK SRR SRF
Display of preparative heating opration from indoor unit.
○ ○ ○
Display of defrost operation from indoor unit.
○ ○ ○
Display of compressor protection operation from outdoor
× × ×
unit during compressor soft starting.
Display it when cooling only outdoor unit is received
× × ×
signal of heating operation.
Displays when periodic check signal is received.
× × ×
Display of checking in case of signal of error code address
○ ○ ○
from remote control.
Displays it when it is received auto cleaning singnal from
× × ×
indoor unit.
Display room temperature.
○ ○ ○
Display of demand operation from indoor unit.
× × ×
Display checking when it receives signal of auto adjusting
× × ×
static pressure operation.
It is available to select manual setting or automatic setting
× × ×
for setting external static pressure by remote control.
-
Outline of function
283
-
'17 • SCM-T-225
Remarks
Starting time of heating, thermo operation
Defrost operation
RAC unit does not have this function.
RAC unit does not have this function.
( RAC unit operates by fan mode.)
RAC unit does not have this function.
RAC unit does not have this function.
RAC unit does not have this function.
RAC unit does not have this function.
RAC unit does not have this function.
RAC unit does not have this function.