Mitsubishi Heavy Industries SCM71ZM-S1 Technical Manual page 285

10. COMPONENT REPLACEMENT
Models SCM71ZM-S1, 80ZM-S1
Fan and fan motor (FMo)
1. Loosen 6 screws and remove
the top panel.
2. Loosen 3 screws and remove
the service panel.
3. After removal of service panel,
loosen a screw.
Screw
4. And then loosen 4 screws and
remove the front panel together
with the fan guard.
5. Loosen a nut and remove the fan
propeller.
6. Disconnect the connector of
CNFAN.
Screws (For front panel)
Screws (For front panel) Screws (For service panel)
Nut
284
- -
'17 • SCM-T-225
Screws (For top panel)
Screws (For top panel)