Warning And Caution For Use - Yoshitake CT-1 Product Manual

Push
Enter key
6sec.
Push
Enter key
④Auto-calibration is completed when display shows standard indication as Fig.13.
Mount cover on the positioner and fix by tightening screw. Please put cover as display
can be shown.
*During calibration, if 「CHK AIR」 is shown, air is not supplied to positioner. In this case,
please check air connection.

9. Warning and caution for use

Warning
(1) Before flow the steam in pipe line, make sure steam can flow without any dangerous at
the end of pipe line and pipe line is connected tightly.
*Failure to follow this notice may result in burns
(2) Do not touch the valve directly with bare hands.
*Failure to follow this notice may result in burns.
Caution
(1) Be sure to close the terminal box cover
*In case of remaining the cover opened, rainwater or surrounding water enter inside
and it cause the leakage and malfunction
Push
Enter key
Calibration is
completed
Fig. 13
and property damage.
-16-
Push
Enter key
Calibration starts
■ EPDT-318a ■