Table of Contents
Advertisement
6.5 Precaution for maintenance
Warning
7.1 Caution for assembly
Disassembling and inspections shall be performed by a professional or a valve
manufacturer.
1. Completely discharge internal pressure of the product, piping and equipment, and
cool down the product prior to disassembling or maintenance in case of
high-temperature fluid.
*Failure to follow this notice may result in scalds or bodily injury due to residual
pressure.
Bolt
Washer
Seat
Cover
Hanger
metal
Valve disc
Valve cover
Spring
Lever
Nut
Fook
Float
The above drawing shows the structure of the TA-16.
The TA-16L has L-shaped hose joint screwed in the
seat [3]. The TA-16CVA and TA-16CVS have check
valve joints (the CV-16A and CV-16S respectively)
screwed in each seat [3].
To attach the cover [2] to the body [1], place the body
[1] from the above on the cover [2].
7. Exploded View
Integral structure
Integral
structure
Integral
structure
6
Gasket
Body
■EPDT-30■
Advertisement
Table of Contents
