6.1 Troubleshooting
Trouble
Fluid does not flow.
Fluid flows back.
6.2 Warning for maintenance
1. Completely discharge the pressure inside of the product, line and equipment before disassembling or
maintenance. In the case of high-temperature fluid, cool down the product till it can be touched with bare
hands.
* Failure to follow this notice may result in injury or burns.
2. Ask professional or experienced company to do the inspection.
6. Maintenance
Cause
1. Contact surface of valve [6] and
valve seat [2] is stuck.
2. Installation direction is wrong.
1. Contact surface of valve [6] and
valve seat [2] is worn away.
2. Internal parts are damaged.
1. Replace the product if valve [6] does not
move.
2. Confirm the arrow on the product and
install it correctly.
1. Replace the product.
2. Replace the product.
Warning
‐6‐
Remedy
■ EPDT-309a ■