Labnet BioPette Multichannel Quick Manual
  1. Manuals
  2. Brands
  3. Labnet Manuals
  4. Laboratory Equipment
  5. BioPette Multichannel
  6. Quick manual

Labnet BioPette Multichannel Quick Manual

Hide thumbs

Advertisement

Table of Contents

M U L T I C H A N N E L
L a b n e t I n t e r n a t i o n a l , I n c .

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BioPette Multichannel and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Labnet BioPette Multichannel

Summary of Contents for Labnet BioPette Multichannel

  • Page 1 M U L T I C H A N N E L L a b n e t I n t e r n a t i o n a l , I n c .
  • Page 2 M U L T I C H A N N E L...
  • Page 3 M U L T I C H A N N E L...

  • Page 4: Table Of Contents

    The specifications for accuracy and precision CONTENTS given in the following table are obtained using 1 - INTRODUCTION Labnet tips. These figures are only guaranteed 2 - VOLUME SETTING when Labnet tips are used. 3 - METHOD OF PIPETTING BioPette 8 channel...

  • Page 5: Method Of Pipetting

    M U L T I C H A N N E L the procedures outlined in the EN ISO 8655 If the knob is accidentally turned too far, ie is standard. set lower than the required value, the process must be repeated. The approach to the set vol- The pipette design enables the user to perform ume must always be made in the order of the recalibration process according to the rules...

  • Page 6: Recommendations

    Recalibration procedure: BioPette™ pipettes are calibrated by gravimetric • Set the dose volume depending on the pipette method, using Labnet tips and distilled water, at volume according to the following table: the temperature 20±1°C, according to EN ISO Volume change ∆V for 8655 standard.

  • Page 7: Cleaning And Sterylization

    M U L T I C H A N N E L • Perform three aspiration series (each series 6 - CLEANING AND STERILIZATION should include the aspirations from all chan- Cleaning nels), weigh each time and calculate the aver- External surfaces of the pipetting pushbutton, age value of the aspirations.

  • Page 8: Spare Parts

    Warning: The replacement of the plunger requires conducting of calibration proce- dure according to section 5. Before returning a pipette to a Labnet representa- tive please ensure that the pipette is completely free of any contamination (chemical, microbial or radioactive).

This manual is also suitable for:

Bpe-10Bpe-50Bpe-200Bpe-300Bpt-10Bpt-50 ... Show all

Table of Contents