Remote Rmtp Connection - RGBlink MSP 325H Quick Start Manual

Table of Contents

Note: If NVR cannot play the video after the above setting, download a ONVIF testing tool from

http://url.cn/2ESQRcn

to the test the ONVIF feature on Encoder.

If the ONVIF feature is normal, please check the NVR settings.

5.3 Remote RMTP Connection

If a large number of users from all over the country need to watch the video source of the same encoder at the

same time, we suggest the RTMP transfer mode. At present, we perfectly support RTMP server platforms

including free platforms: NGINX, RED5 MEDIA SERVER,paid platform: ADOBE MEDIA SERVER5 and some

platforms such as http://mudu.tv/. Other methods of setting the RTMP publication are as follows:

Since the current RTMP protocol only supports H.264 function, you need to set the encoder type to H.264, set

the RTMP publishing address in the live broadcast platform and enable it as shown in the picture below. After

setting, please restart the encoder.

Note: Some live streaming platforms provides a live code and the RTMP address. Then we need to combine the

two pages of text and fill in to the encoder: RTMP address plus slashes, and live code Such as RTMP address is:

RTMP: / / video mudu. TV/live broadcast code for: abcdef combination: rtmp://video.mudu.tv/live/abcdef

Ph: +86 592 5771197 |

support@rgblink.com

www.rgblink.com

Table of Contents