Snmp Agent - NetModule NB3710-LWA User Manual

SNMP Configuration
The following parameters can be used to configure the SNMP agent:
Parameter
Administrative status
Operation mode
Contact
Location
Listening Port
Once the SNMP agent is enabled, SNMP traps can be generated using SDK scripts.
NB3710 User Manual 3.8
Figure 5.46.: SNMP Agent
SNMP Configuration
Enable or disable the SNMP agent
Specifies if agent should run in compatibilty mode or for
SNMPv3 only
System maintainer or other contact information
Location of the device
SNMP agent port
125