Static Route Flags - NetModule NB3710-LWA User Manual

Parameter
Netmask
Gateway
Interface
Metric
Flags
The flags obtain the following meanings:
Flag
A
P
H
N
D
NB3710 User Manual 3.8
Static Route Configuration
The subnet mask which forms, in combination with the des-
tination, the network to be addressed. A single host can be
specified by a netmask of 255.255.255.255, a default route
corresponds to 0.0.0.0.
The next hop which operates as gateway for this network
(can be omitted on peer-to-peer links)
The network interface on which a packet will be transmitted
in order to reach the gateway or network behind it
The routing metric of the interface (default 0), higher met-
rics have the effect of making a route less favorable
(A)ctive, (P)ersistent, (H)ost Route, (N)etwork Route,
(D)efault Route
Description
The route is considered active, it might be inactive if the
interface for this route is not yet up.
The route is persistent, which means it is a configured route,
otherwise it corresponds to an interface route.
The route is a host route, typically the netmask is set to
255.255.255.255.
The route is a network route, consisting of an address and
netmask which forms the subnet to be addressed.
The route is a default route, address and netmask are set
to 0.0.0.0, thus matching any packet.
Table 5.33.: Static Route Flags
65