Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for studioduc knox doublewide desk
Summary of Contents for studioduc knox doublewide desk
- Page 1 ASSEMBLY INSTRUCTIONS knox doublewide desk a how-to guide that won’t leave you in tears...
- Page 2 parenting is hard. this is easy. no really, it is. MADE HERE™ MADE WELL™ MADE SAFE MADE SMART...
- Page 3 want to watch this assembly IRL? (acronym challenged? that means “in real life”.) open the camera on your phone and place it over the QR code below to see our NYC studio dream team do all the heavy lifting (just kidding, there is none!) if you’re already using your phone, just click the orange button below! ASSEMBLY VIDEO CHANNEL...
- Page 4 thank you for selecting a studio duc product!
- Page 5 please check contents against the components list in these instructions. also, please ensure there was no damage that may have occurred in shipping. if any components are missing or you find any damage, please contact ducduc before continuing. read all the instructions before use. pay close attention to the safety warnings in these instructions.
-
Page 6: What's In The Box
WHAT’S IN THE BOX: A1 (x2) A2 (x2) R side panel L side panel B (x2) C (x2) D (x2) back panel fixed shelf bottom panel top panel... - Page 7 WHAT’S IN THE BOX: F (x8) G (x12) screws hammer cap foot DB2 (x4) DB1 (x4) drawer box back drawer face DB3 (x4) DB4 (x4) DB5 (x4) L drawer box side R drawer box side drawer box bottom DB6 (x4) DB7 (x4) knox pull hardware screw for knox pull...
-
Page 8: What You'll Need
WHAT YOU’LL NEED: household hammer or phillips head screwdriver and/or rubber mallet drill with 6mm bit 20 minutes a soft surface to assemble on (or less) (like a rug or some of the corrugate box your piece arrived in) 2 people plus a dog for moral support (unless you’re a cat person) - Page 9 lean one bottom (D) against a wall as shown. beginning in one corner, take a foot (F) as seen below, and insert the bolt located on foot (F) into the brackets on bottom panel (D). Twist until the foot is fully secure, and repeat for all feet (F) provided.
- Page 10 lean one R side panel (A1) against a wall as shown. insert connectors on one back panel (B) into the slots on R side panel (A1) as shown. push down at the connection to lock into place. if needed, tap with hammer and hammer cap (H). ASSEMBLY VIDEO CHANNEL still confused? click to watch the assembly video...
- Page 11 insert connectors on back panel (B) into slots on one L side panel (A2). push down at the connection to lock into place. gently lay the partially assembled case on its back as shown. wait! locate bottom panel (D) with attached feet (F) before moving on to the next step.
- Page 12 insert connectors on both side panels (A1 + A2) into slots on bottom panel (D). push down or tap with hammer and hammer cap (H) to lock into place. ASSEMBLY VIDEO CHANNEL still confused? click to watch the assembly video...
- Page 13 lower fixed shelf (C) into the case. align the three pins at the back of the fixed shelf (C) with the 3 holes on the back panel (B). push down or use hammer with hammer cap (H) to lock into place. fixed shelf important! before locking into place, be...
- Page 14 use screws (G) and your phillips head screwdriver to secure fixed shelf (C) to each side of the case interior. phillips head G (x12) screw driver screws repeat steps 3-9 to build the second case from the remaining parts. ASSEMBLY VIDEO CHANNEL still confused? click to watch the assembly video...
- Page 15 place both cases in the location where the desk will be fully assembled with the cases spaced 60” apart. 60’’ with a friend, line up holes of top panel (E) with the connectors located at the top of each case. once all holes are aligned, tap with hammer and hammer cap (H) to lock into place. ASSEMBLY VIDEO CHANNEL still confused? click to watch the assembly video...
- Page 16 now we build the drawer! starting with drawer face (DB1) facing down, insert connectors of both drawer box side panels (DB3 + DB4) into slots on drawer face (DB1). push down at the connections to lock into place. rotate the partially assembled drawer box as shown. slide drawer box bottom (DB5) into place using grooves on the drawer box side panels (DB3 + DB4) as guides.
- Page 17 again, rotate partially assembled drawer box as shown. insert connectors of drawer box back (DB2) into slots on drawer box sides (DB3 + DB4). push down at the connections to lock into place. use hammer and hammer cap (H) if needed. using a phillips screwdriver and screw (DB7), attach the pull hardware (DB6) to the front of the drawer face.
- Page 18 repeat steps 13a-13d to build the remaining 3 drawer boxes. pull drawer glides out to extended position as shown. ASSEMBLY VIDEO CHANNEL still confused? click to watch the assembly video...
- Page 19 place the assembled drawer box onto extended glides as shown. from underside of drawer, use hands to pull each glide forward until it locks into connection with glide hardware attached to drawer box bottom (DB5). the drawer will be secure when you hear a click on each connection.
- Page 20 repeat steps 15a-15b to install the remaining 3 drawers. ASSEMBLY VIDEO CHANNEL still confused? click to watch the assembly video...
- Page 21 bravo! you did it! give yourself a pat on the back, take a bow, or go house a pint of ice cream…we don’t judge.
- Page 22 prefer to talk to a human instead? we’re here for you! contact our customer advocate team below: 212.226.1868 quack@ducducnyc.com live chat at 200 lexington avenue ducducnyc.com ny, ny 10016...
Need help?
Do you have a question about the knox doublewide desk and is the answer not in the manual?
Questions and answers