Print; Setup; Settings In The Main Mask - sauter HMO Instruction Manual

3.5 Print

Fig. 2-6
English
Set type of impact device
Set material
Set limit value
Set impact direction
Turn on/off backlight
Enter menus

4 Setup

The hardness tester is equipped with a touch display and most settings can be made
directly from the main screen. Some functions require calling up the respective menu
masks to make the desired settings or for operating purposes.

4.1 Settings in the main mask

The hardness tester is equipped with a touch display and the most common test
parameters can be set directly in the main mask (Fig. 3-1).
HMO-BA-e-2020
The hardness tester can be connected to a wireless printer to
print a test report.
Place the printer near the tester (at a distance of up to 2 m)
and switch it on.
A test report is shown in Fig. 2-7. Detailed report
information can be defined in the respective menu (see par.
3.2.2)
German
Setting the type of impact device
Set material
Set limit value
Setting the impact direction
Lighting ON / OFF
Call up the menu
9