Table of Contents
Related Manuals for sauter HEA 100
Summary of Contents for sauter HEA 100
- Page 1 Sauter GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-mail: info@kern-sohn.com Internet: www.sauter.eu Operating instructions Shore hardness tester SAUTER HE V. 1.0 01/2024 HE-BA-e-2410...
-
Page 2: Table Of Contents
SAUTER HE V. 1.0 01/2024 Operating instructions Shore hardness tester Table of contents: Technical data ......................4 Declaration of Conformity ..................4 Device overview ......................4 Scope of delivery ........................4 Operating and display elements ..................4 Basic information (general) ..................5 Intended use .........................5 Improper use ........................5 Warranty ..........................6... - Page 3 Save .........................12 Interfaces .........................12 12.1 USB connection ........................12 12.2 Print............................. 12 Maintenance, servicing and disposal ..............12 13.1 Cleaning ..........................12 13.2 Maintenance and repair ...................... 12 13.3 Waste disposal ........................12 Battery law ......................13 HE-BA-e-2410...
-
Page 4: Technical Data
1 Technical data SAUTER HEA 100 HED 100 Function Hardness testing using the indentation method Measuring range 0 - 100 HA 0 - 100 HD Readability 0.1 HA 0.1 HD Accuracy ± 1HA ± 1HD Internal memory 500 measured values... -
Page 5: Basic Information (General)
Only use the device to measure the hardness of plastics within the measuring range specified in the technical data. To use the appliance as intended, only use accessories or spare parts by SAUTER. The HE is used to measure the hardness of plastics by measuring the penetration depth. The handy shape and the integrated rechargeable battery make it possible to work with the device on the move. -
Page 6: Warranty
5 Basic safety instructions Observe the notes in the operating instructions Read the operating instructions carefully before commissioning/using the device, even if you already have experience with SAUTER devices. Always keep the instructions in the immediate vicinity of the appliance. Staff training The device may only be used by persons who have read and understood the operating instructions, in particular the chapter on safety. -
Page 7: Transport And Storage
WARNING Risk of injury from electric shock! ● There is a risk of short circuit due to liquids penetrating the housing! ● Do not immerse the device and accessories in water. Ensure that no water or other liquids get into the housing. ●... -
Page 8: Unpacking And Commissioning
On receipt of the device, you should first check that no damage has occurred during transport, that the outer packaging, the plastic housing, other parts or even the device itself have not been damaged. If any damage is evident, please notify SAUTER GmbH immediately. Initial commissioning To ensure the function of the hardness tester, it must be charged with the charging cable before use. -
Page 9: Memory
Language Menu item Function Language Setting the language (English) Printing Setup Menu item Function Printing Setup Setting options for infrared printers (not supported by SAUTER) Information Menu item Function Information Display the: Serial number Firmware version number Model designation HE-BA-e-2410... -
Page 10: Basic Operation
Iorder to achieve a stable, reproducible value, carry out at least 3, preferably 5 measurements and calculate the mean value. Support The appropriate TI-HEA or TI-HED test stand from SAUTER can be used to improve the measurement results. HE-BA-e-2410... -
Page 11: Adjustment
10 Adjustment If the device is not used for a longer period of time or the measured values do not appear plausible, it is advisable to adjust it. To do this, go to Menu→ System→ Calibration. Place the hardness reference block or the calibration block (included in the scope of delivery) on a stable, solid surface. - Page 12 12.2 Print The HE series has the option of printing the test reports with an infrared printer, but the print function is not supported by SAUTER. 13 Maintenance, servicing and disposal Disconnect the appliance from the power supply before carrying out any maintenance, cleaning or repair work.
- Page 13 14 Battery law Note in accordance with the Battery Act - BattG: INFORMATION • The following information is valid for Germany. In connection with the sale of batteries and rechargeable batteries, we are obliged as a dealer under the Battery Act to inform end users of the following: •...
Need help?
Do you have a question about the HEA 100 and is the answer not in the manual?
Questions and answers