sauter HMO Instruction Manual page 13

Delete
It is possible to delete larger amounts of data or all data at once from the memory.
It is recommended to delete the data individually.
IMPORTANT: Deleted data cannot be recovered. Therefore, it is recommended to use
the delete function with care.
3) Upload data
The data from the memory can be transferred to the PC
can be uploaded.
To do this, connect the PC and start the upload software
call (Ehard).
Select the Upload Data function, then the data can be received or processed in the
software by PC.
Detailed information can be found in the operating instructions for the software.
System settings
Material settings
It is possible to adapt conversion tables as
required and to select them for material "A", "B"
and "C".
It is possible to select a scale as required and
enter data in the conversion table (Fig. 3-19)
Automatic printing
If the "Automatic printing" function is active
(ON), a test report is printed automatically after
the test of the respective statistics group is
completed (the printer must be switched on).
Coarse error
If the function "Gross error" is active (ON), gross errors are displayed according to
the settings for Grubbs after the determination of "Statistical parameters".
HMO-BA-e-2020
Fig. 3-15
→
Fig. 3-16
Fig. 3-16
Fig. 3-17
Fig. 3-18
Fig. 3-19
13