sauter HMR Instruction Manual

DIGITAL LEEB HARDNESS TESTER
Model: HMR

Table of contents

1. Overview
1.1 HMR Advantages
1.2 Main Application & Testing Range
1.2.1 Main Application
1.2.2 Testing Range
1.3 Configuration
1.4 Working Conditions
2. Structure Feature & Testing Principle
2.1 Structure Feature
2.1.1 Hardness Tester Appearance
2.1.2 Parts of the Main body
2.1.3 D Type Impact Device
2.1.4 Different types of Impact Devices
2.2 Leeb Hardness Testing Principle
3. Technical Specifications
4. Preparation & Testing
4.1 Preparation and Inspection before Testing
4.1.1 Preparation of Sample Surface
4.1.2 System Setting
4.1.3 Presetting Testing conditions
4.2 Testing Program
4.2.1 Start-up
4.2.2 Testing
4.2.3 Reading the Measured Value
4.2.4 Power Off
5. Advice
6. Operation in Details
6.1 Power On
6.2 Power Off
6.3 Testing
6.3.1 Full description of the Main Display
6.3.2 Testing Operation at the Main Display
6.3.3 Key Operation at the Main Display
6.4 Menu Structure
6.5 Test Set
6.5.1 Impact Direction Setting
6.5.2 Average Times Setting
6.5.3 Material Setting
6.5.4 Hardness Scale Setting
HMR-BA-e-1212
Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@sauter.eu
Instruction Manual
HMR
6.5.5 Tolerance Limit Setting
6.5.6 Hardness / б b Setting
6.6
6.7
6.7.1 View from No.1 Group/ View from Ending Group
6.7.2 View from Selected No. Group
6.7.3 Data Transfer
6.7.4 Delete by Group No.
6.7.5 Delete all Data
6.7.6 Deletion Confirmation
6.8
6.9
6.9.1 LCD Brightness Setting
6.9.2 Date/ Time Setting
6.10 Software Information
6.11 System Calibration
6.12 EL Background Light
6.13 Auto Power Off
6.14 Battery Replacement
6.15 Connection of Data Transmission Cable
7.
8.
8.1
8.2
9.
10.
11.
APPENDIX
1.
1.1
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Print Set
Memory Management
Browsing Memory Data Groups
System Reset
Fault Analysis & Fault Clearance
Servicing & Maintenance
Impact Device Servicing
Normal Maintenance Program
Calibration
Transport and Storage Conditions
Declaration of Conformity
Table 1
Table 2
Table 3
Table 4
Overview
HMR Advantages

Wide measuring range based on the principle of
Leeb Hardness testing theory. Leeb Hardness of
all metallic materials can be measured.

Large screen (128 x 64 dot matrix LCD) showing
all functions and parameters.

Testing at any angle, even upside down

With EL background light

Direct display of hardness scales HRB, HRC,
HV, HB, HS, HL

Seven impact devices are available for special
applications. Automatical identification of type of
impact devices

Large capacity memory can store 500 groups,
information including single measured value,
mean value, testing date, impact direction,
impact times, material, hardness scale etc.

Upper and lower limit can be preset. It will alarm
automatically if the result value is exceeding the
limit.

Battery information: rest capacity of battery is
indicated.
1