UNITY Lasers ELITE 2 ILDA User Manual page 6

UNITY Lasers s.r.o.
LASER EMISSION DATA
• Class 4 Laser Projector - Avoid Eye and Skin Exposure to Direct or Scattered Light!
• This Laser Product is designated as Class 4 during all procedures of operation.
• Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard
"For Safe Use of Lasers", available from the Laser Institute of America: www.laserinstitute.org. Many
local governments, corporations, agencies, military and others, require all lasers to be used under the
guidelines of ANSI Z136.1.
UNITY Lasers s.r.o.
• Laser Classification Class 4
• Red Laser Medium AlGaInP, 639 nm, depending on model
• Green Laser Medium InGaN, 520-525 nm, depending on model
• Blue Laser Medium InGaN, 445 nm to 465 nm depending on model
• Beam Diameter <10 mm at aperture
• Divergence (each beam) <2 mrad
• Maximum total output power 2 – 11,5 W, depending on model
LASER COMPLIANCE STATEMENT
• This laser product complies with FDA performance standards for laser products except for deviations
pursuant to Laser Notice No. 56, dated May 8, 2019. This laser device is classified as a Class 4
demonstration laser product.
• No maintenance is required to keep this product in compliance with laser performance standards.
Elite ILDA series Operational Manual (Revision 2022-10)
6