Table of Contents
Advertisement
Quick Links
ELITE 2 PRO | ELITE 3 PRO
ELITE 5 PRO | ELITE 10 PRO
Notice
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED LIGHT
CLASS 4 LASER PRODUCT
USER MANUAL
Manufactured/ Certified by
UNITY Lasers s.r.o.
Odborárska 23
831 02 Bratislava
Slovakia, Europe
Classified per IEC 60825-1 2014
Complies with US FDA CDRH laser safety
standards 21 CFR 1040.10 & 1040.11
and Laser notice 50
Advertisement
Table of Contents
Related Manuals for UNITY Lasers ELITE 2 PRO
Summary of Contents for UNITY Lasers ELITE 2 PRO
- Page 1 USER MANUAL ELITE 2 PRO | ELITE 3 PRO ELITE 5 PRO | ELITE 10 PRO Manufactured/ Certified by Notice Classified per IEC 60825-1 2014 UNITY Lasers s.r.o. Complies with US FDA CDRH laser safety AVOID EYE OR SKIN EXPOSURE TO Odborárska 23...
-
Page 2: Table Of Contents
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Contents INTRODUCTION WHAT IS INCLUDED UNPACKING INSTRUCTIONS GENERAL INFORMATION SAFETY NOTES LASER AND SAFETY NOTES PRODUCT SAFETY LABEL LOCATION PRODUCT SAFETY LABELS INTERLOCK CONNECTION DIAGRAM INSTRUCTIONS FOR USING E-STOP SYSTEM... -
Page 3: Introduction
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) INTRODUCTION Thank you for purchasing your purchase. To optimize the performance of your laser, please read these operating instructions carefully and familiarize yourself with the basic operations of this system. These instructions contain important safety information regarding the use and maintenance of this system as well. -
Page 4: Safety Notes
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) SAFETY NOTES WARNING! This projector is a Class 4 laser product. It must never be used for audience-scanning applications. The output beam of the projector must always be at least 3 meters above the floor in the audience. -
Page 5: Laser And Safety Notes
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) LASER AND SAFETY NOTES STOP AND READ ALL THE LASER SAFETY NOTES BELOW Laser Light is different from any other light sources with which you may be familiar. The light from this product can cause eye and skin injury if not set up and used properly. - Page 6 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) LASER EMISSION DATA Class 4 Laser Projector - Avoid Eye and Skin Exposure to Direct or Scattered Light! This Laser Product is designated as Class 4 during all procedures of operation.
-
Page 7: Product Safety Label Location
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) PRODUCT SAFETY LABEL LOCATION FRONT PANEL 1. Aperture Label 2. Hazard Warning Symbol 3. Interlocked Housing Label (duplicate label found on underside of top panel) TOP PANEL 4. Aircraft Warning Label 5. -
Page 8: Product Safety Labels
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) PRODUCT SAFETY LABELS Logotype Danger Label Hazard Warning Symbol Aperture Label Aircraft Warning Label... - Page 9 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Interlocked Housing Label Manufacturer Label Certification Label...
-
Page 10: Interlock Connection Diagram
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Interlock Connection Diagram... -
Page 11: Instructions For Using E-Stop System
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) INSTRUCTIONS FOR USING E-STOP SYSTEM Connect the ESTOP box to the 3-pin interlock connector on the rear of the laser projector using a 3-PIN XLR cable. **Note that the E-Stop box has an available secondary interlock port. The secondary port is to be used to interface a secondary interlock device (e.x. -
Page 12: Theory Of Operation
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Theory of operation "UNITY Laser projector" is supplied with "E-Stop Box" and "Remote Interlock bypass" including one cable. If user doesn't need aditional "User E-Stop Switch", "Remote Interlock bypass" should be insterted into "Remote Interlock Connector"... -
Page 13: Operation
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Caution – use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Laser Product is designated as Class 4 during all procedures of operation. - Page 14 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) INSTRUCTIONS FOR TURNING OFF THE LASER SYSTEM Turn off the key switch; and deactivate via the red mushroom switch on the E-stop box. You can remove the 3-Pin interlock box too, if the laser will be kept for no use. (We recommend having a professional operator to keep the keys and 3-Pin interlock switch.)
-
Page 15: Safety Tests
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) SAFETY TESTS The following tests MUST be performed each time the projector is used. Before performing these tests, verify that the projector is facing a safe direction (away from all people and reflective objects) and aimed at a suitable termination surface. -
Page 16: Model Specifications
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) MODEL SPECIFICATIONS: Product Specification (Elite 2 PRO) Type of laser: full-colour, semiconductor diode laser system Guaranteed optical output: 2,100mW small to medium indoor / outdoor laser shows and laser graphic... - Page 17 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Front & Rear panel view (Elite 2 PRO) Name Function Laser aperture Laser output, do not look directly into this aperture Aperture masking Can be moved up and down when two locking bolts are loosened. The plate masking plate can also be attached to the top of the aperture.
- Page 18 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Dimension details (Elite 2 PRO)
- Page 19 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Product Specification (Elite 3 PRO) Type of laser: full-colour, semiconductor diode laser system Guaranteed optical output: 3,100mW small to medium indoor / outdoor laser shows and laser graphic Suitable for:...
- Page 20 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Front & Rear panel view (Elite 3 PRO) Name Function Laser aperture Laser output, do not look directly into this aperture Aperture masking Can be moved up and down when two locking bolts are loosened. The plate masking plate can also be attached to the top of the aperture.
- Page 21 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Dimension details (Elite 3 PRO)
- Page 22 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Product Specification (Elite 5 PRO) Type of laser: full-color, semiconductor diode laser system Guaranteed optical output: >5,100mW medium to large sized indoor / outdoor laser shows and laser graphic Suitable for:...
- Page 23 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Front & Rear panel view (Elite 5 PRO) Name Function Laser aperture Laser output, do not look directly into this aperture Can be moved up and down when two locking bolts are loosened. The masking plate Aperture masking plate can also be attached to the top of the aperture.
- Page 24 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Dimension details (Elite 5 PRO)
- Page 25 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Product Specification (Elite 10 PRO) Type of laser: full-color, semiconductor diode laser system Guaranteed optical output: 11,000mW Suitable for: large indoor / medium outdoor laser shows and laser graphic displays...
- Page 26 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Front &Rear panel view (Elite 10 PRO) Name Function Laser aperture Laser output, do not look directly into this aperture Can be moved up and down when two locking bolts are loosened. The masking plate Aperture masking plate can also be attached to the top of the aperture.
- Page 27 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) Dimension details (Elite 10 PRO)
-
Page 28: Ilda Pinout Specification
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) ILDA PINOUT SPECIFICATION 1 X+ 14 X- 2 Y+ 15 Y- 3 Intensity/ Blanking + 16 Intensity/ Blanking - 4 Interlock A 17 Interlock B 5 R+ 18 R- 6 G+... -
Page 29: Technical Information - Maintenance And Service
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) ECHNICAL NFORMATION – MAINTENANCE AND SERVICE MAINTENANCE GENERAL CLEANING INSTRUCTIONS – TO BE DONE BY USER Due to fog residue, smoke, and dust cleaning the external body of the projector should be carried out periodically to optimize light output. - Page 30 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) 7. While standing behind the laser, power up the system as normal. 8. Project a large white circle onto a laser safe surface. Use the least amount of power that enables all the laser modules.
- Page 31 UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) 1. Once the alignment is satisfactory then power down the system with the E-stop 2. Flip the interlock defeats back to their normal position. 3. Replace the top panel and replace the hex button bolts.
-
Page 32: Service
UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7) SERVICE There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact us directly or your local distributor, who will help you with a repair or replacement.