Table of Contents
Advertisement
7.3
Opening the burner
Disconnect the electrical supply from the burner
by means of the main system switch.
DANGER
Turn off the fuel interception tap.
DANGER
7.4
Closing the burner
Refit following the steps described but in reverse order; refit all
burner components as they were originally assembled.
After carrying out maintenance, cleaning or
checking operations, reassemble the hood and all
the safety and protection devices of the burner.
Maintenance
Wait for the components in contact with heat
sources to cool down completely.
In order to open the burner, proceed as follows:
➤ unscrew the screws 1)
➤ pull back part A while keeping it slightly lifted.
D421
29
GB
Fig. 30
20098582
Advertisement
Table of Contents
