Electrical System - Riello PRESS GV INCINERATOR Installation, Use And Maintenance Instructions

5.13.2 Electrical system

Key to wiring layouts (Fig. 23 and Fig. 24)
C Capacitor
RMO Control box
FR Photocell
MB Burner terminal strip
MV Fan motor
TA Ignition transformer
TB Burner ground (earth) connection
V Light oil solenoid valve
IN Manual burner stop switch
MB Burner terminal strip
PS Lock-out reset button
S Remote lock-out signal
TB Burner ground (earth) connection
TL Limit control device system: this shuts down the burner
when the boiler temperature or pressure exceeds the set-
point value.
TS Safety control device system: this operates when TL is
faulty.
20098582
Installation
ELECTRICAL EQUIPMENT FACTORY SET
ELECTRICAL CONNECTION OF BURNER BY INSTALLER
22 GB
D2555
Fig. 23
D2556
Fig. 24