Technical Specifications; Standards And Approvals - Siemens SIMATIC S7-1500 System Manual

Technical specifications

Introduction
This chapter lists the technical specifications of the system:
• The standards and test values that the modules of the S7-1500R/H redundant system
comply with and fulfill.
• The test criteria according to which the S7-1500R/H redundant system was tested.
Technical specifications for the modules
The technical specifications of the individual modules can be found in the manuals of the
modules themselves. In the event of deviations between the statements in this document
and the manuals, the statements in the manuals take priority.
15.1

Standards and Approvals

Currently valid markings and authorizations
NOTE
Information on the components of the S7-1500R/H redundant system
The identifiers and approvals currently valid are printed on the components of the
S7-1500R/H redundant system.
Safety information
Personal injury and damage to property may occur
In hazardous areas, injury and damage can occur if you disconnect plug-in connections
during operation of an S7-1500R/H redundant system.
Always switch off the power to the S7-1500R/H redundant system before disconnecting
plug-in connections in hazardous areas.
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD
WARNING
15
351