Quick Reference Table - Supermicro SuperServer SYS-510D-4C-FN6P User Manual

Quick Reference Table

Jumper
J1
JBM1
JBT1
JNS1
JPF1
JPG1
JPL1, JPL2, JPL3
JPME2
JPT1
JWD1
LED
LED1
LED2
LED3
LEDM1
Connector
BT1
COM1
FAN1 – FAN4, FANA, FANB
IPMI LAN
I-SATA1 and I-SATA3
I-SGPIO1
JD1
JF1
JGP1
JIPMB1, JIPMB2
JL1
JLANLED1
JLANLED2
JLANLED3
JMD1
JMD2
JMD3
Description
SIM Card Detection
IPMI Shared LAN Enable/Disable
CMOS Clear
SlimSAS Interface Selection
Power Force On
VGA Enable/Disable
LAN1, LAN2, LAN3/4 Enable
ME Manufacturing Mode
Onboard TPM 2.0 Enable/Disable
Watchdog Timer
Description
Power LED
UID LED
Overheat (OH)/Power Fail/Fan Fail LED
BMC Heartbeat LED
Description
Onboard Battery
COM Header
CPU/System Fan Headers (FAN1: CPU Fan)
Dedicated IPMI LAN Port
SATA 3.0 Ports (I-SATA1: SATA DOM Power)
Serial Link General Purpose I/O Header
Power LED/Speaker (Pins 1-3: Power LED, Pins 4-7: Speaker)
Front Control Panel Header
General Purpose I/O Header
4-pin BMC External I C Headers
2
Chassis Intrusion Header
LAN1 Activity LED Header
LAN2 Activity LED Header
LAN3/4 Activity LED Header
M.2 M-Key 2280 PCIe 3.0 x4 or SATA 3.0 Slot
M.2 B-Key 2280/3042/3052 PCIe 3.0 x2 or SATA 3.0 or USB 3.0 Slot
M.2 E-Key 2230 PCIe 3.0 x1 or USB 2.0 Slot
14
Chapter 1: Introduction
Default Setting
Pins 1-2 (High Active)
Open (Enabled)
Open (Normal)
Pins 2-3 (PCIe x4)
Pins 1-2 (ATX)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Status
Solid Green: Power On
Solid Blue: Unit Identified
Solid Red: Overheat
Blinking Red: Power Fail or Fan Fail
Blinking Green: BMC Normal