Appendix B System Specifications - Supermicro SuperServer SYS-510D-4C-FN6P User Manual

Appendix B: System Specifications
Appendix B
System Specifications
Processors
Supports an Intel Xeon D-1700 series processor with a thermal design power (TDP) of up to 80W
Note: Refer to the motherboard specifications pages on our website for updates to supported processors.
BIOS
AMI BIOS
ACPI 3.0 or later, PCI firmware 4.0 support, BIOS rescue hot-key, SPI dual/quad speed support, RTC (Real Time Clock)
wakeup, and SMBIOS 3.0 or later
Memory
Up to 256GB of ECC and Non-ECC RDIMM/UDIMM DDR4 memory with speeds of up to 2933MT/s in four memory slots
Storage Drives
Up to four SATA3 2.5" internal solid-state disk drives
PCI Expansion Slots
One FHHL PCIe 4.0 x16 slot
Two PCIe 3.0 x4 SlimSAS connectors
Networking
One dedicated BMC LAN port
Four Gigabit Ethernet ports
Two 25G SFP28 ports
Input/Output
Two rear USB 3.0 ports
One rear VGA port
Five onboard SATA 3.0 connectors (one with SuperDOM)
Motherboard
X12SDV-4C/8C/10C-SP6F; Flex ATX (WxL) 9 x 7.25 in (228.6mm x 184.15mm)
Chassis
CSE-505-203B; 1U Short-Depth (WxHxD) 17.2 x 1.7 x 9.8 in (437 x 43 x 249 mm)
System Cooling
Three internal fixed 40 x 28 mm fans
Power Supply
200W AC 80Plus Gold power supply
Operating Environment
Operating Temperature: 10º to 40º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Regulatory Compliance
FCC, ICES, CE, VCCI, RCM, UKCA, NRTL, CB
95