Quick Reference Table - Supermicro X11DPFF-SN User Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPME2 ME Manufacturing Mode
JWD1 Watch Dog Timer Enable
Connector
Battery (BT1)
CPU1 Slot1 PCI-E (JPCIE4)
CPU1 Slot2 PCI-E (Slot 2)
CPU1 SIOM (SIOM)
COM (JCOM1)
FAN1-FAN4
IPMB (JIPMB1)
IPMI_LAN (JIPMILAN)
HDD_PWR1/2
HDD_PWR3/4
JPW1/JPW2 (PB PWR1/2)
JPW3 (PB MISC)
M.2-HC0/M.2-HC1 (J30/J31)
PN-NVMe01/2/3 (NVME0/1/2/3)
PWR (PWR_SW1)
(I-)SATA0-3, 4-7
(S-)SATA0-3
TPM/Port80 (JTPM1)
USB0/1 (JUSB1)
UID (JUID1)
VGA (JVGA1)
VROC (JRK1)
LED Description
FAILURE_LED1 Overheat/Fan Fail LED
HDD_LED1 HDD Activity LED
LE1 CPLD Heartbeat LED
LED3 M.2 LED (for M.2-HC0-J30)
LED4 M.2 LED (for M.2-HC1-J31)
LEDM1 BMC Heartbeat LED
UID_LED1 UID LED
Description
Onboard CMOS battery
PCI-E 3.0 x16 slot supported by CPU1
PCI-E 3.0 x8 slot supported by CPU1
PCI-E 3.0 x16 Super IO Module (SIOM) slot supported by CPU1
COM Port1
System/CPU cooling fan headers
System Management Bus header for IPMI 2.0
Dedicated IPMI_LAN port supported by BMC (Baseboard Management Controller)
8-pin power connectors (1/2) header used for HDD devices
4-pin power connectors (3/4) header used for HDD devices
12-V 8-pin power connectors for ADPs (via cables connected to power adaptor cards)
8-pin auxiliary power connector for ADP (via a cable connected to a power adaptor card)
PCI-E/SATA hybrid M.2 slots (M.2 slots with both PCI-E and SATA support)
Onboard NVMe connectors used for PCI-E high-speed storage devices supported by
CPU2
Front panel power (on/off) switch
SATA 3.0 connections supported by Intel PCH (I-SATA 0-3, 4-7)
SATA 3.0 ports supported by Intel PCH (S-SATA 0-3)
Trusted Platform Module (TPM)/Port 80 connector
Front panel USB 3.0 ports 0/1
Unit Identifier (UID) button
VGA port
Intel VROC RAID Key header for NVMe SSD
13
Chapter 1: Introduction
Status
Solid Red: OH/Fan Failure
Blinking Green: HDD Active
Blinking Green: CPLD Normal
Blinking Green: M.2-HC0 Active
Blinking Green: M.2-HC1 Active
Blinking Green: BMC Normal
Solid Blue: Unit Identified
Default Setting
Open (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)