Table of Contents
Advertisement
3.3 Memory
Memory Support
The X12SDV-4C/8C/10C-SP6F motherboard supports up to 256GB of ECC and Non-
ECC RDIMM/UDIMM DDR4 memory with speeds of up to 2933MT/s in four memory slots.
Populating these DIMM slots with memory modules of the same type and size will result in
interleaved memory, which will improve memory performance.
Refer to the table on the next page for the recommended DIMM population order.
ESD Precautions
Electrostatic Discharge (ESD) can damage electronic com ponents including memory modules.
To avoid damaging your DIMM modules, it is important to handle it very carefully. The following
measures are generally sufficient to protect your equipment from ESD.
•
Use a grounded wrist strap designed to prevent static discharge.
•
Handle the memory module by its edges only.
•
Put the memory modules into the antistatic bags when not in use.
•
Check the Supermicro website for recommended memory modules.
Chapter 3: Maintenance and Component Installation
25
Advertisement
Table of Contents
Troubleshooting
