Hardware Kit (Not To Scale) - Precor Discovery Plate Loaded Pulldown Assembly Manual

Hardware Kit (not to scale)

The following pieces of hardware are provided on a shrink-wrapped card. Each part is labeled on the card for easy reference.
Table 1. Hardware kit contents
Fasteners
Pulldown Assembly Guide: Getting Started
Buttonhead cap screw (M8 x 15 mm)
Socket head cap screw (M12 x 35 mm)
Socket head cap screw (M5 x 20 mm)
Socket head cap screw (M5 x 12 mm)
Flat washer (9 mm internal diameter)
Set screw (M8 x 6 mm)
Quantity
1
16
2
4
5
10
3