Assembling The Equipment - Precor Discovery Plate Loaded Pulldown Assembly Manual

Assembling the Equipment

CAUTION: At least two people are required to position the parts of this
equipment successfully. Do not attempt to assemble the equipment by
yourself.
Proper alignment and adjustment of the equipment is critical. When you
install fasteners, leave room for adjustments. Do not tighten the fasteners
completely until you are instructed to do so.
Make sure the equipment is stable and placed on a solid surface. The
equipment is designed to be freestanding, but it can be bolted to the floor
for extra stability. Precor highly recommends that the equipment be bolted
to the floor to reduce the risk of toppling due to improper use. Because floor
construction varies, consult a professional building engineer for proper
fastening.
Pulldown Assembly Guide: Assembling the Equipment
The following figure shows the names used in this manual for the major
components of the equipment.
Figure 1: Major Pulldown components
7